Friday, May 29, 2015

New Hazardous Location Magnetic Proximity Sensor - 7HL




New from Canfield Connector - Hazardous Location Magnetic Proximity Sensor
This 7HL rugged magnetic proximity sensor is designed to sense actuator position in stringent, hazardous location applications. The switch features a robust, epoxy-filled, aircraft aluminum body, and has a vibration and shock resistant, electronic circuit. The 7HL is an expansion of the popular Series 7000 "floating" clamp design and will clamp on 2 to 8 inch bore NFPA tie rod linear actuators.

Canfield Magnetic Sensors are available in either reed or electronic sensing styles, the sensors are fully encapsulated for IP 67 service.


Additional Information:

Catalog Link: 7HL Catalog Page

Installation Guide: 7HL Installation Guide

Wednesday, May 20, 2015

SMC's New Modular Style FRL Combination - AC-B Series

SMC's new Modular AC-B Series is an addition to the popular AC-A series of air preparation, filter regulator lubricator (FRL) units.  The AC-B series varies from the AC-A series in a couple of ways.  It has an increased set pressure range of 125 psi.  Additionally, the handle dimensions on the regulators and integral filter/regulators are interchangeable with the old AC series.  Embedded gauge options are also available in the AC-B version but not in the AC-A.

Feature Overview:

  • Mounting interchangeable with existing model
  • Better visibility and safety from the Double Layer Polycarbonate bowl
  • Easy maintenance and installation with the new spacer
  • 7 to 125 PSI set pressure range

 

 

 


 

Better Environmental Resistance


The inner bowl is protected by a transparent polycarbonate bowl guard for complete protection without the need for viewing windows.  Even when the unit is exposed to chemicals or oil, the inner pressure retaining bowl does not come in contact with the external contaminants.

Selection of Pressure Displays


Modular Connection


 
SMC AC-B and AC-A units are available from stock in all configurations.  Contact Scott Equipment  and we will be glad to assist you with any FRL configuration your application requires.

Tuesday, May 19, 2015

New F-Guides from LinMot

 
LinMot USA F-Guides are available in single axis, with optional z-axis, and in gantry configurations as shown above.  The F-Guides use LinMot's linear motors to deliver high speed and accurate positioning.
 
F-Guide Advantages:
  • Uses an industry standard high speed bearing and rail system.
  • Increased actuator stiffness and smoother operation
  • Stroke lengths from 5.5" to 74.7"
  • Guides are shipped from stock 2-3 week delivery.
  • Repeatability without an external sensor +/- 0.002 in
  • Repeatability with an external sensor +/- 0.0004 in
  • Uses LinMot's linear motors with an expected operating life on the motor of up to 2 billion cycles when properly applied**
 
 
Applications:

  • Synchronous Insertion or Cutting
  • Product Sorting
  • Product Rejection
  • Product Assembly
  • Product Repositioning including Rotation
  • Container / Bottle Capping
  • Conveyor Diverting / Positioning
  • Label Positioning - Application
  • Camera - Lighting Positioning
  • Pad Printing
  • Sealer Positioning and Control
For additional information including detailed information visit LinMot-usa.com.  Detailed information can be found in the LinMot F01-37S Guide.

If you have a specific application, would like to see a demo, need sizing assistance please contact Scott Equipment.

Wednesday, May 6, 2015

Easily Integrate Tolomatic's ACS Servo and Stepper Drive into Studio 5000 Logix Designer

 

 

Easily integrate the Tolomatic ACS Servo and ACS Stepper drive into Studio 5000 Logix Designer with Add-On Instructions.

 

 

 

The addition of Add-On Instructions use for Rockwell’s Studio Logix 5000 Designer creates simple, quick to program functionality to the ACS Servo and ACS Stepper drive.  The pre-configured Add-On Instructions allow for the full functionality of the drive including move types, homing, output control and more. 
Tolomatic also offers complete documentation and how to instructions for importing the Add-On Instructions into the Studio Logix 5000 Designer software suite as well as a variety of sample programs.

 

 

 

This documentation along with Tolomatic's industry leading technical support ensures that the ACS drive is the shortest point between A and B to commissioning your project.

 

 

ODVA Conformant

Link to ODVA website

 


 

Add-On Instructions Tech Note

Add-On Instructions Download

EtherNet/IP Example Program

 

EtherNet/IP Programmer's Guide

ACS Servo Hardware & Installation Guide

ACS Stepper Hardware & Installation Guide

 

SMC Catalog announcement for Compact Thermo-Chiller, Series HRS


A new catalog has been released for SMC Compact Thermo-Chiller, Series HRS

-A lightweight circulating fluid temperature controller that is easy to operate.

-Available in 6 cooling capacities from 1300 to 5900W -UL standard certification -Can maintain a temperature from 5 to 40 Celsius +/-0.1 Celsius -Refrigeration circuit can be cooled by air or facility water -Includes heating function using compressor discharge gas -Displays temperatures, pressures, and operating times -Conducts self-diagnosis with 35 types of alarm codes

 

 

Catalog Link: http://content2.smcetech.com/pdf/North_American_Catalog/SMC-NAS40-55F-HRS.PDF